Baystar Compact Outboard Hydraulic Steering Cylinder HC4658-3

Dometic BayStar Outboard Compact, Front Mount, Steering Cylinder HC4658H (HC4658-3) This outboard cylinder is designed to be compact and balanced, fitting most splash wells and providing full engine movement. Suitable for up to 150hp Outboards. (See suitability guide below)

Features

• Patented No Feed Back™ Steering lock valves
• 5 turns lock-to-lock
• Up to 150 horsepower (total)
• Requires 21” (534mm) splash well width Front mount
• Dometic Art no: 9130000532
• Baystar Art no: HC4658-3

Notes

1. Requires Spacer kit part no HO5090
2. Engine clamp brackets must be cut or ground, and the engine through bolted onto the transom, or interference will occur, restricting engine trim and tilt.
3. Steering hook Yamaha Part no 63D-48511-00-4D must be installed
4. Cylinder HC4645-3 may be used in these applications. The pivot plate will need to be flipped before installation.
Instructions provided with Owner’s Manual.
5. High performance 150 HP engines and any engine using a 4-3/4″ gear-case such as Command Thrust MUST use SeaStar.